The AW–GC-1204 loading arm home position produced by our company is suitable for AL1204 bottom loading arm.It mainly supports the quantitative loading control system,and it automatically detects whether the hoist is in use during the use of loading arm,and outputs the general dry.The contact signal is applied to the quantitative loading controller,PLC and DCS to realize effective loading safety interlock control.The loading arm home position provides liquid and gas phase homing detection,and the homing seat of loading arm home position can be fully connected to the international standard API quick connector.
The equipment complies with the relevant safety standards and is applicable to tank truck loading occasions of liquid petrochemical products such as flammable and explosive.
(1)This equipment is used for the safe production of the quantitative loading control instrument.
(2)The equipment shell is made of high-strength material,which is firm,reliable,beautiful and durable;
(3)The sensor intelligently detects whether the crane tube is homed,and outputs an interlock signal through the control box isolation control panel;
(4)The sensor has a high life span and can be used for more than one million times,while preventing oil and dust;
(5)The sensor is intrinsically safe,with ultra low power consumption;
(6)Simple wiring,convenient for customers to install on site;
(7)The loading arm home position joint conforms to the API standard and is made of aluminum alloy to avoid the risk of fire;
(8)A variety of combinations,including single-phase,two-phase,three-phase,four-phase,liquid phase and gas phase etc.,to meet different customer needs.