1, hair oil platform and crane tube connections with the respective standard flange, and to ensure a solid and reliable base flange, flange height from the ground is 2.1 to 2.2 meters, the crane flip when the flange height from the ground 2.7 to 2.8 meters.
2, Loader crane tube (fluid loading arm) esoteric brand manufacturers all crane factory in Fig tightness test has been made, simply referring to the crane structure diagram when the user installs, the first level of the short tube with hair oil platform base flange connected, and then connect the horizontal pipe with short boom group, the final installation balancer connecting rod balancer.
3. After assembly is completed, the adjustments balancer, the first boom lift to about 60 ° above the balancer end cap unscrewed adjusting screw so that the crane within the range of -15 ° ~ 60 ° can be parked.
4, the installation process, each flange surfaces must be clean light, there must be O-rings with butter installed before connecting seal groove.
5, each pin must be coated with lubricating oil before rotating part and the spring balancer installation.
6, pay attention to the angle of installation horns 9 horizontal rotary device entry angle is not appropriate to re-adjust.