Pneumatic actuators

　　Stainless steel, carbon steel, carbon steel and plastic-coated actuators have strong anti-corrosion performance and are suitable for engineering environments with high anti-corrosion requirements.

　　The main technical parameters

　　Air source: dry or lubricated air, non-corrosive gas, oil, impurity particles in the medium <30μm;

　　Air source pressure: minimum air source pressure 2.5Bar, maximum air source pressure 10Bar;

　　Working temperature: standard type: -20 ℃ ～ + 80 ℃; low temperature type -40 ℃ ～ + 80 ℃; high temperature type -20 ℃ ～ + 150 ℃;

　　Connection standard: the air source interface, the output shaft and the installation size of the top of the cylinder comply with the NAMUR standard;

　　The installation dimensions of the bottom of the cylinder comply with S05211, DIN3337 standards;

　　Stroke adjustment: 0 ° and 90 ° two positions can be adjusted within ± 5 °, adjustable angle ± 5 °;

　　Cylinder body material: 316L, 316, 304, 303 stainless steel actuator, the surface is electrolytically polished;

　　Optional valves: ball valve, butterfly valve, plug valve and other angular stroke valves.

　　Maximum torque output: single-acting can provide more than 700Nm, double-acting can provide more than 1400Nm of torque output.